Powers 08135P-PWR, Triggerfoam PRO All Season 29oz

Applications

TriggerFoam Pro is dispensed through a special gun that allows the user to control the rate of flow as well as the size of the bead for more precise placement of the product, allowing it to be used in a wide variety of applications. Use it to fill, seal or insulate. It blocks drafts, stops leaks, saves energy, adheres to all types of construction materials, deadens sound, acts as a buoyancy material oncecured, control radon, helps confine asbestos fibers, and can be used in HVAC applications.

• Around window frames, sills, door frames floor/wall joints
• Refrigeration units and pipes
• Electrical junction boxes
• Attics
• Air conditioning systems
• Breaches in walls
• Sound Dampening
• Voids in concrete forms
• Pipe penetrations in non-fire rated walls
• Underground ductwork

TriggerFoam Pro is a one part polyurethane expanding foam with an extended temperture range which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the 2-3 times expansion of the foam after it leaves the nozzle. Thesurface of the foam initially dries within 1-4 hours and becomes fully cured in 12-15 hours. Extended application temperature range allows use at temperatures as low as 23єF (-5єC). May be used at 14єF (-10єC) if can is stored at 77єF (25єC) for 8 hours before use. TriggerFoam Pro sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding, staining or painting. The foam has a R-5 equivalent value when used in place of traditional installation methods.

• CFC free propellant
• Class B2 Flame retardant
• Physiologically harmless when fully cured
• Contains no urea formaldehyde or PCB's
• Does not rot or deteriorate with age
• Low odor
• High foam yield – up to 1.8 ft3 per 29 oz. can
• Easily adjustable applicator can dispense foam beads as small as 1/8"
• Hardened steel dispenser tip for longer life on metal tool
• Precision plastic valve helps prevent pressure loss and prolongs shelf life
• Stop and go application product remains liquid in applicator until dispensed
• Minimal subsequent expansion (± 10%)
• Compatible with PVC
• VOC: 157 g/L